Home / All / SMT Cleaning Machine / PCB/PCBA cleaning machine /

PCBA Cleaning Machine-SME-5600

PCBA Cleaning Machine-SME-5600

PCBA Cleaning Machine-SME-5600
PCBA Cleaning Machine-SME-5600PCBA Cleaning Machine-SME-5600PCBA Cleaning Machine-SME-5600
CategoriesPCB/PCBA cleaning machine
BrandSAMTRONIK
ModelSME-5600
Cleaning basket size610mm(L)*560mm(W)*100mm(H)x 2 layers
Concentration liquid tank capacity30L
Dilution tank capacity60L
Spray tank capacity18L
FOB portShenzhen
Terms of PaymentL/C, D/A, D/P, Western Union, T/T
Update TimeMar 28,2024
Detail Information

PCBA Cleaning Machine-SME-5600

Descriptions:

Features

1. the whole process  visible : the cleaning process can be visible through the front window and LED light.

2. automatic cleaning mode: clean, rinse, dry process can complete in one cabinet and compact machine.

3. the most scientific nozzle design: the use of left and right incremental distribution --- to enhance cleaning efficiency,The upper and lower dislocation distribution - completely solve the cleaning blind area;

4. the nozzle pressure adjustable design: to solve the small and light PCBA in the high pressure spray under the conditions of the collision, splash problem;

5. the standard dilution tank heating system: greatly improve the cleaning efficiency. Shorten the cleaning time;

6. a comprehensive cleaning system: for SMT; THT PCBA after welding the surface of the residual rosin, water-soluble flux, no-clean flux / solder paste and other organic and inorganic pollutants for thorough and effective cleaning;

 7. convenient cleaning dilution to add: can be manually added, but also by setting the ratio (5% to 25%) automatically with DI water and chemical liquid (option);

8.  Temporary tank and auxiliary heating system: Temporary tank is used to store dilution and DI water.

    During cleaning process, the  air pump absorb dilution form dilution tan and send to temporary tank ,then wash pump absorb dilution from temporary tank to clean PCBA. After cleaning process, the air pump absorb dilution from temporary tank  and send them back to dilution tank.

   During rinsing process, the air pump absorb DI water from DI water produce machine and send it to temporary tank, each time after rinsing ,DI water will be discharged form temporary tank. The rinse water can be heated as needed;

 9. Lower operating costs: built-in filter makes the dilution repeated used. By using compressed air blow method at the end of cleaning process : blow the residual detergent off from pipeline and the pump , which effectively save 50% dilution.

 10. The concentration lqiuid compensation function: the concentration of dilution will be getting lower and lower after repeated use which will affect the cleaning effect and cleaning efficiency of PCBA, at this time , need to add some concentrated liquid  to dilution tank to compensate the dilution concentration. concentration compensation can improve the effective use of liquid, the concentration liquid adding amount can be adjustable according to the real situation.   

Specifications:

Item

parameters

Cleaning basket size

610mm(L)*560mm(W)*100mm(H)x 2 layers

 Concentration liquid tank capacity

       30L

Dilution tank capacity

       60L

Spray tank capacity

      18L

Temporary tank heater

      6KW

Cleaning time

     0~99min(adjustable)

liquid temp

    Room temp -75 degrees / (adjustable)

Rinse time

   1-99 times / 1~2min each time

Rinse water temp

     Room temp -75 degrees / (adjustable)

Drying time

    0 to 99 minutes / (adjustable)

Resistivity meter monitoring range

    0~18MΩ

liquid tank heater

   9KW

Drying Temperature:

Room Temp--99 /Adjustable

Drying Heater/KW

6KW

Spray Pressure

30PSI - 80PSI/(Adjustable

Chemical liquid level filter

0.22μm (filter microparticles: solder paste, rosin, flux and contaminants)

DI water Filter

0.22μm (filter microparticles: solder paste, rosin, flux and contaminants)

water inlet

1 inch fast junction interface

Water outlet

1 inch fast junction interface

Chemical Inlet

1 inch fast junction interface

Real - time pressure gauge

3PCS (nozzle / DI water / waste liquid)

  pump

5.5KW

Outlet size

Φ100W)×30mm(H)

Power source

AC380V 50HZ 65A/0.45MPa~0.7MPa

Weight

600Kg

Machine Dimension

1300mm(L)×1200mm(W)× 1850mm(H)

Company Profile

About Samtronik

Samtronik is a professional one-stop SMT Equipment service provider , With more than 10 years Electronic Manufacturing Service factory Equipment selling experience .

 

Samtronik mainly supply pcb handling equipment ,PCB Separator ,screw locking machine , smt cleaning machine , smd counter , smd taping machine ,smt parts etc .


Why Choose Us

1.We promise customer response within 24 hours;
2. Well-trained and experienced staffs to answer all your enquires in fluent English;
3.Best products and price to offer;
4.Shortest time to delivery the products ;
5.All machine will be strictly   testing before shipment;
6.OEM & ODM services offered;
7.Best Guarantee :With 1 years warranty !

Product Packaging &Contacting Us

                  Shipment by sea ,by air ,by DHL, UPS ,Fedex express etc 
Review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
follow us
subscription